Steel toll processor Andes Coil Processors has added embossing services to its Gary, Ind., facility with the installation of a new, 52-in. embossing line. The line produces a nondirectional stucco pattern in metal at a depth of up to 0.013 in. This pattern is suitable for use on shelving products, industrial flooring, and building products. Additional output patterns will be added as customer requirements warrant.

The line runs coils from 5 to 52 in. wide at more than 250 FPM. It handles thicknesses from 0.010 to 0.045 in. in steel and 0.010 to 0.080 in. in aluminum. Maximum incoming and outgoing weight capacity is 25,000 lbs.

The FABRICATOR is North America's leading magazine for the metal forming and fabricating industry. The magazine delivers the news, technical articles, and case histories that enable fabricators to do their jobs more efficiently. The FABRICATOR has served the industry since 1970.

Easily access valuable industry resources now with full access to the digital edition of The FABRICATOR.

Easily access valuable industry resources now with full access to the digital edition of The WELDER.

Easily access valuable industry resources now with full access to the digital edition of The Tube & Pipe Journal.

Enjoy full access to the digital edition of STAMPING Journal, which serves the metal stamping market with the latest technology advancements, best practices, and industry news.

Easily access valuable industry resources now with full access to the digital edition of The Fabricator en Español.

© 2022 FMA Communications, Inc. All rights reserved.

Not yet registered? Sign up